■Compatible model: Hiace ■Compatible model: TRH/KDH200 series ■Drive system: 2WD

``In order to achieve the ultimate ride comfort, we have adopted a two-layer structure with different hardness!'' The most serious problem faced by the Hiace. That's the unpleasant thrust caused by low-down. By significantly lowering the vehicle height from the standard vehicle height, the effective stroke of the suspension will be extremely reduced, causing a collision with the stock stopper when making a large bump. However, if you try to avoid this by driving with the stopper removed, the front tires will rub the wheel house violently on bumps or curves, and in the worst case scenario, this could lead to poor steering. A "bump stopper" is an essential item to prevent them. The innovative two-layer molding technology, perfected through repeated trial and error, achieves both bump shock reduction and stroke control at a high level. In addition, by combining it with the newly developed "Mount Plate", it is now possible to install a large stopper that exceeds the width of the top of the arm. The stopper with increased capacity has significantly improved crushing rigidity and boasts far greater durability than conventional products. Experience the ultimate bump control that continues to evolve without stopping. Precautions for use ●This product is a part exclusively for low-down specification vehicles. It is designed to be lowered by 1.5 inches (-37.5 mm) or more compared to the standard vehicle height. ●For 2WD only●This product complies with safety standards, but please note that the inspector's judgment will take precedence when it comes to vehicle inspections. ●This product uses synthetic resin with low hardness. Please understand that there is a possibility of deformation and crushing due to long-term use.


Manufacturer: Genb
Brand: Genb
Model name: SBB01H
Package size: 26.2 x 12.5 x 7.3 cm; 415.99 g
Product model number: ‎SBB01H
Certification: ‎No
Product weight: ‎416 g