By connecting to the separately sold drive recorder (model number: DC3600R), the camera will be able to detect and record impacts to the car, such as door punches and hit-and-runs while parked. *This product is a parking monitoring option. Camera not included. By automatically switching the recording mode, long-term monitoring is possible. [Recording mode] ① Continuous recording mode that can be monitored for up to 30 minutes ② Pre- and post-recording mode that can be monitored for up to 16 hours ③ Post-recording mode that can be monitored for up to 2 weeks If the battery voltage value falls below the set value for a certain period of time, the camera Turn off the power to prevent the battery from dying.

Automatically switches between three recording modes for long-term parking monitoring By connecting to a camera (DC3600R, sold separately), it automatically switches to parking monitoring mode according to the ON/OFF of the vehicle key switch, allowing you to monitor parking in the parking lot. Records door punches, hit-and-runs, etc. During parking monitoring mode, long-term monitoring is possible by automatically switching between the following three recording modes. *When operating at high temperatures or when the voltage drops below the set voltage, the operating mode will be changed or stopped before each maximum time is reached. (1) Continuous recording mode - Monitoring for up to 30 minutes. For parking while you are out shopping or running errands.・Recorded by constant recording and impact recording (video including 10 seconds before detection and 10 seconds after detection). (2) Before and after recording mode - Monitoring for up to 16 hours. While parking while commuting to work or school.・Records 10 seconds before impact detection and 30 seconds after impact detection. (3) Post-recording mode - Monitoring for up to 2 weeks. When you are at home and do not drive for a long time. -Records 30 seconds from approximately 2 seconds after impact detection. Parking monitoring mode Other functions ■Battery monitoring function - If the battery voltage value falls below the set value for a certain period of time, the camera will be turned off to prevent the battery from dying. [Specifications] Power supply voltage: DC 12V / 24V Rated output voltage: DC 5V Maximum current consumption (DC12V): Drive mode shooting: 480mA, parking surveillance mode shooting: 350mA *Includes camera current consumption Built-in fuse: 0.5A tube Fuse (ACC cord), 5A tube fuse (BATT cord) Vehicle side cable length: Approx. 2m Camera side cable length: Approx. 4m External dimensions: H110mm x W70mm x D20mm (excluding cord part) Weight: Approx. 300g Operating temperature range: - 10℃～+50℃ Warranty period: 3 years [Set contents] ・Parking monitoring unit ・One-touch connector x 2 [Before purchasing] ●This product is free from malfunctions, failures caused by the use of this product, and recorded information. Our company assumes no responsibility for any damage or damage to video or data that may occur. ●The condition of the vehicle battery varies depending on the usage status and environment of the vehicle. Change the voltage monitoring function settings according to the battery condition. If the engine does not start due to insufficient voltage, the battery may be deteriorated and we recommend replacing it with a new battery. ●This product is for DC12V/24V vehicles only. ●It must be installed in a location that meets the following conditions.・Do not interfere with driving operation.・Do not obstruct the operation of the airbag.・Water droplets do not easily adhere to the product. - No direct sunlight.


Screen size (inches): 2 inches
Battery included: No
Batteries used: No
Brand name: CARMATE
Manufacturer: ‎CARMATE
Product model number: ‎DC204
Accessories: ‎User manual
Other functions: ‎Parking monitoring
Display type: ‎LCD
Assembly method: ‎Adhesive type
>Product size: ‎2 x 8 x 11 cm; 350 g